Sony HCD-SH2000 - Page 87

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
HCD-SH2000
8787
Note: If wire (fl at type) is replaced, install it after bending
it in the same form as that before replacement.
MISCELLANEOUS
**************
11 1-828-944-51 WIRE (FLAT TYPE) (7 CORE)
53 1-829-021-51 WIRE (FLAT TYPE) (23 CORE)
152 1-828-328-51 WIRE (FLAT TYPE) (13 CORE)
157 1-474-315-11 SWITCHING REGULATOR
158 1-837-344-11 CORD, POWER SUPPLY (E2, E51, MX)
158 1-838-939-11 CORD, POWER (SAF)
158 1-838-969-11 POWER-SUPPLY CORD (EA, MY)
159 1-457-369-12 CORE, FERRITE
161 1-569-007-12 ADAPTOR, CONVERSION 2P (E2, E51)
201 A-1114-646-A MD (AU) ASSY (including MS-214 board)
203 1-828-252-51 WIRE (FLAT TYPE) (24 CORE)
0 206 8-820-322-04 DEVICE, OPTICAL KHM-313CAB/C2RP
(including sled motor, spindle motor)
207 1-828-300-11 WIRE (FLAT TYPE) (7 CORE)
FL901 1-483-367-11 VACUUM FLUORESCENT DISPLAY
0 M891 1-855-006-11 FAN, DC
*************************************************************
Ver. 1.1