44
<SWITCH ASSIGN2>
15 (U10)
LENS VTR S/S OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2, VTR S/S
JN/SY models only.
Assigns a function to the VTR START/STOP switch
on the mounted lens.
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, VTR S/S
CE/E models only.
Assigns a function to the VTR START/STOP switch
on the mounted lens.
FRONT RET1 OFF, RETURN1 SW
, RETURN2
SW, INCOM1, INCOM2,
D.EXTENDER
JN/SY models only.
VTR S/S is available only when using the
camcorder as a stand-alone device, and adds the
REC signal to the SDI signal. Pressing this button
repeatedly, toggles recording on/off. While
recording, the tally lamp lights in red.
OFF, RETURN1 SW
, RETURN2
SW, ENG, PROD, D.EXTENDER
CE/E models only.
FRONT RET2 OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2,
D.EXTENDER, VTR S/S
JN/SY models only.
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, D.EXTENDER,
VTR S/S
CE/E models only.
HANDLE SW1 OFF, RETURN1 SW
, RETURN2
SW, INCOM1, INCOM2, ZOOM(T),
VTR S/S
JN/SY models only.
OFF, RETURN1 SW
, RETURN2
SW, ENG, PROD, ZOOM(T),
VTR S/S
CE/E models only.
HANDLE SW2
OFF, RETURN1 SW, RETURN2
SW,
INCOM1
, INCOM2, ZOOM(W)
JN/SY models only.
OFF, RETURN1 SW, RETURN2
SW,
ENG
, PROD, ZOOM(W)
CE/E models only.
ZOOM SPEED 0 to 99, 20
HKCT INCOM MIC OFF, INCOM1, INCOM2
JN/SY models only.
Assigns a function to the INTERCOM MIC switch on
the HKC-T1500.
OFF, ENG
, PROD
CE/E models only.
Assigns a function to the INTERCOM MIC switch on
the HKC-T1500.
OPERATION
Page title
PageNo.
Item Settings Description
To Next Page
Loading...
