Sony HDCU2000 - Page 28

28
Status Display
Status of the board inserted in Slot5
(HDCU2000 only)
The setting status of the board installed in Slot5 (front/rear) is
displayed.
Note
The items displayed differ depending on board connected to
the expansion slot.
Status of the board inserted in Slot6
(HDCU2000 only)
The setting status of the board installed in Slot6 (front/rear) is
displayed.
Note
The items displayed differ depending on board connected to
the expansion slot.
CCU SDP board diagnostics
Power: Status of power supply to the SDP board
PLD Version: SDP board PLD version
Camera hardware diagnostics
Displays the camera hardware status.
ROM version information for major
components
CAMERA: ROM version of the camera connected to this unit
CCU: ROM version of this unit
*EN-B(Slot5) Diag* 16/20
Sub-Ref:None
Unknown
Front:EN2-B Power:OK
PLD Version:1.00 Done
Rear:VDA-B Power:OK
*Slot-6 Diag* 17/20
Front None
Rear :--------
*SDP Diag* 18/20
Power:OK
PLD Version:1.00 Done
*CAMERA Diag* 19/20
ALL BOARD OK
*ROM Version* 20/20
CAMERA HDC2500
1.00 11.12.20
CCU HDCU2000
1.00 11.12.20