37
Menus
<DETAIL 1>
P09
DETAIL ON, OFF
LEVEL
–99 to +99, 0
Absolute value is displayed in ABS mode.
LIMITER M
–99 to +99, 0
LIMITER WHT
–99 to +99, 0
Absolute value is displayed in ABS mode.
LIMITER BLK
–99 to +99, 0
Absolute value is displayed in ABS mode.
CRISP
–99 to +99, 0
Absolute value is displayed in ABS mode.
LEVEL DEPEND
–99 to +99, 0
Absolute value is displayed in ABS mode.
ON
, OFF
ABS Highlighted: ABS (Absolute) mode
<DETAIL 2>
P10
H/V RATIO
–99 to +99, 0
Absolute value is displayed in ABS mode.
FREQ
–99 to +99, 0
Absolute value is displayed in ABS mode.
MIX RATIO
–99 to +99, 0
Absolute value is displayed in ABS mode.
KNEE APT
–99 to +99, 0
Absolute value is displayed in ABS mode.
ON, OFF
DTL H/V MODE H/V, V only
ABS Highlighted: ABS (Absolute) mode
<SKIN DETAIL>
P11
SKIN DTL ON, OFF
SKIN GATE OFF, 1, 2, 3, (MAT) 1, 2, 3: The skin gate function can be turned ON for the
specified channel only.
(MAT): Displayed when GATE of <MULTI MATRIX> is
ON.
ABS Highlighted: ABS (Absolute) mode
ZOOM LINK OFF
, ON
TELE 0 to 99
WIDE 0 to 99
CH SW 1: (ON), 2/3: ON, OFF
Sets the skin tone detail function independently for
each channel. (Channel 1 is always set to ON.)
Absolute values are indicated for LEVEL only in ABS
mode.
HUE 1/2/3: ENTER to execute
PHASE 1/2/3: 0
to 359
WIDTH 1/2/3: 0 to 90, 29
SAT
1/2/3:
–99 to +99, –89
LEVEL
1/2/3:
–99 to +99, 0
<USER MATRIX>
P12
R-G
–99 to +99, 0
R-B
–99 to +99, 0
G-R
–99 to +99, 0
G-B
–99 to +99, 0
B-R
–99 to +99, 0
B-G
–99 to +99, 0
MATRIX ON, OFF
PRESET ON, OFF, -- --: When MATRIX is set to OFF (cannot be changed)
SMPTE-240M, ITU-709
, SMPTE-
WIDE, NTSC, EBU, ITU-601, --
USER ON, OFF
, --
MULTI ON, OFF
, --
ADAPTIVE MATRIX OFF
, ON
Page name
Page No.
Item Settings Description
To Next Page
Loading...
