Sony HT-FS3 - Page 55

55
GB
Advanced Settings
x After pairing
Sound transmission is established between the
paired subwoofer and S-AIR sub unit(s) only.
To perform pairing
1 Place the S-AIR sub unit that you want
to pair near the subwoofer.
2 Match the IDs of the subwoofer and the
S-AIR sub unit.
• To set the ID of the subwoofer, see “To set
the ID of the subwoofer” (page 51).
• To set the ID of the S-AIR sub unit, refer
to the operating instructions of the S-AIR
sub unit.
3 Press AMP MENU.
4 Press X/x repeatedly until “SET S-AIR”
appears in the front panel display, then
press or c.
• When the wireless transmitter is not inserted in
the subwoofer, “SET S-AIR” cannot be selected.
5 Press x/X repeatedly until “PAIRING”
appears in the front panel display, then
press or c.
6 After “START” appears in the front
panel display, press .
The subwoofer starts pairing and
“SEARCH” flashes in the front panel
display.
To cancel pairing, press AMP MENU.
This subwoofer
ID A
ID A
S-AIR sub unit
ID A
S-AIR sub unit
Your room
Neighbor
Pairing
No transmission
Note
SYSTEM STANDBY
MENU/HOME
TOOLS/
OPTIONS
TV VOL
MASTER VOL
123
46
78
0
ENTER
9
THEATRE
TV
?/1
AV ?/1
TV BD DVD
DIGITAL1 DIGITAL2 TUNER/BAND DMPORT
SAT/CATV
TOP MENU
MENU
BD/DVD
RETURN/EXIT
TV
TUNING - TUNING +
F1 F2
AMP MENU
CLEAR
DISPLAY
NIGHT
MODE
SOUND
FIELD
AUDIO ANALOGDIGITAL
?/1
TV CH -
PRESET -
TV CH +
PRESET +
F
Gg
f
.
mM
Xx
< <
>
5
SYSTEM STANDBY
MENU/HOME
TOOLS/
OPTIONS
N
AMP
MENU
C, X, x, c,
continued