What to do if the remote control does not function with my Sony HT-M7?
To resolve this, point the remote control directly at the remote control sensor on the receiver. Ensure there are no obstructions between the remote and the receiver. If the batteries are weak, replace them with new ones. Also, verify that you have selected the correct input on the remote control.
Why are the left and right sounds unbalanced or reversed on my Sony HT-M7 Home Theater System?
If the left and right sounds are unbalanced or reversed on your Sony Home Theater System, check that the speakers and equipment are connected correctly and securely. You can also adjust the level parameters using the LEVEL menu.
What to do if there is no sound from a specific equipment connected to my Sony HT-M7 Home Theater System?
If there is no sound from a specific equipment connected to your Sony Home Theater System, check the following: * Ensure the equipment is correctly connected to the audio input jacks for that equipment. * Verify the connecting cord(s) are fully inserted into the jacks on both the receiver and the equipment. * Check the INPUT MODE. * Check the setting of “AUDIO.OUT” in the HDMI menu. * Confirm the equipment is correctly connected to the HDMI jack for that equipment. * Note that you cannot listen to Super Audio CD by connecting HDMI.
What to do if the remote control for my Sony HT-M7 Home Theater System does not function?
If the remote control for your Sony Home Theater System isn’t working, try these steps: * Point the remote control at the remote control sensor on the receiver. * Remove any obstacles between the remote control and the receiver. * Replace the batteries in the remote control with new ones if they are weak.
Why is there no sound, no matter which equipment is selected, or only a very low-level sound is heard from my Sony HT-M7?
If you experience no sound or very low sound from your Sony Home Theater System, regardless of the selected equipment, consider the following: * Verify that all connecting cords are fully inserted into the input/output jacks of the receiver, speakers, and equipment. * Ensure both the receiver and all equipment are powered on. * Check that the MASTER VOLUME is not set to “VOL MIN”. * Press MUTING on the remote control to disable the muting function. * Make sure you have connected to both the L and R jacks of an analog equipment. * Adjust the speaker level. * Check that the speaker cords are connected correctly and securely. * Note that some discs have no Dolby Digital Surround EX information.
Why is there noise, skipping, or distorted sound when playing from USB on my Sony HT-M7?
To fix this, turn off the receiver and reconnect the USB device, then turn the receiver back on. If the issue persists, the music data itself may contain noise or distortion.
Why playback does not start on my Sony HT-M7?
Turn off the receiver and reconnect the USB device, then turn on the receiver again. If the issue continues, make sure you are using a supported USB device. Press NX to start playback.
Why Dolby Digital or DTS multi channel sound is not reproduced on Sony Home Theater System?
First, check that the DVD or other media you are playing is recorded in Dolby Digital or DTS format. If connecting a DVD player to the digital input jacks, ensure the digital audio output setting of the connected equipment is enabled. Set “AUDIO.OUT” to “AMP” in the HDMI menu. Note that Multi Channel Linear PCM is only available with an HDMI connection.
How to fix unbalanced or reversed left and right sounds on Sony Home Theater System?
Make sure the speakers and equipment are connected correctly and securely. Adjust the level parameters using the LEVEL menu.
How to fix severe hum or noise in my Sony Home Theater System?
To address hum or noise, ensure speakers and equipment are securely connected. Keep connecting cords away from transformers, motors, TVs, and fluorescent lights (at least 3 meters/10 feet). Move audio equipment away from the TV. If plugs and jacks are dirty, clean them with a cloth slightly moistened with alcohol.
Lists all included items and their quantities, such as manuals, antennas, and cables.
Provides step-by-step instructions for inserting batteries into the remote control.
Describes the layout of buttons, indicators, and ports on the receiver's front panel.
Explains indicators for channel playback, signal formats (DTS, LPCM), and USB device status.
Explains indicators for input sources (HDMI, COAX), system status (Dolby, Tuning), and special functions (D.RANGE, SLEEP).
Visual guides illustrating the rear panel connections for the HT-M7 and HT-M5 models.
Visual guides for the HT-M3 rear panel and descriptions of antenna and speaker terminals.
Detailed description of remote buttons used for controlling the receiver's functions.
Detailed description of remote buttons used for controlling a Sony TV's functions.
Step-by-step instructions for initial receiver setup, including connecting speakers and preparing the receiver.
Guidance on connecting TV, video, and audio devices to the receiver.
Recommended placement diagrams for front, surround, and subwoofer speakers based on model.
Advice on optimal speaker angles, subwoofer placement, and attaching foot pads.
Diagram and instructions for connecting speakers to the HT-M7 receiver's terminals.
Diagrams and instructions for connecting speakers to the HT-M5 and HT-M3 receivers.
Explains speaker cord color coding and how to match them to the receiver's terminals.
Guidance on connecting the TV via HDMI, Component, or Video signals, including ARC function.
Details on using HDMI for video sources, its features, and important notes.
General tips for connecting various cables, including digital audio, and avoiding damage.
Illustrates HDMI connections for Blu-ray players, PS3, tuners, and TVs.
Illustrates non-HDMI connections (Optical, Coaxial, Component, Video) for various sources.
Details specific optical and coaxial connections for the HT-M3 model.
Instructions for connecting devices used for recording audio/video.
Instructions for connecting CD players and portable audio devices for playback.
Guide to connecting a USB device to the receiver's USB port.
Instructions for connecting the supplied FM wire and AM loop antennas.
Instructions for setting the voltage selector and connecting the AC power cord.
Procedure for resetting the receiver to factory default settings.
Guide to setting speaker positions (FRONT/REAR) according to your setup.
Using the test tone feature to balance speaker output levels.
Selecting input sources, starting playback, and controlling volume.
Customizing input names for easier identification and using the mute function.
Lists compatible music file formats (MP3, AAC, WMA) and compatible Sony USB devices.
Important considerations for using USB devices, including format compatibility and device recognition.
Explains buttons for USB playback, fast forward/rewind, repeat modes, and folder navigation.
Further notes on USB device operation, including connection through hubs and file/folder limits.
How to check information like input name, sound field, and volume levels on the display panel.
Explains common messages displayed when using a USB device, such as READING, DEVICE ERROR, NO SUPPORT.
Steps for setting up the source and recording equipment to start recording.
Information on copyright protection, recording limitations, and auto standby settings.
Instructions for automatic tuning (scanning) and direct tuning (frequency entry).
How to store, recall, and name preset radio stations, and change AM tuning scale.
Guide to choosing different sound modes (MOVIE A, MOVIE B, MUSIC, GAMING) for optimized audio.
Notes on sound field limitations and how to turn off surround effects.
Explanation of BRAVIA Sync, its benefits, and the Control for HDMI function.
Steps for setting up BRAVIA Sync with compatible and non-compatible TVs for simplified operation.
Simplified playback of connected equipment with a single touch.
How to enjoy TV sound through the receiver's speakers and control volume.
Features for turning off connected devices simultaneously and optimizing sound for selected TV scenes.
Setting audio input priority (AUTO, COAX, OPT, ANALOG) for different sources.
Navigating and adjusting various receiver settings via the menu system.
Detailed explanations for adjusting speaker levels, distance, tone (EQ), and tuner presets.
Detailed explanations for audio sync, digital formats, HDMI control, and system preferences like display and standby.
General safety advice, handling of power sources, and precautions regarding heat buildup.
Guidelines for proper receiver placement, ventilation, and addressing potential TV interference from speakers.
Solutions for receiver power failure, no image on TV, and no output in standby mode.
Troubleshooting no sound, low sound, recording failures, unbalanced speakers, and surround effect problems.
Solutions for poor FM reception, tuning errors, and common USB device errors or playback issues.
Troubleshooting USB device recognition, playback errors, file format limitations, and corrupted data.
Solutions for remote control malfunctions and how to interpret system error messages.
Details on power output, impedance, requirements, and input/output signal levels.
Details on tuner ranges, USB bit rates, power consumption, dimensions, mass, and speaker characteristics.
General| Brand | Sony |
|---|---|
| Model | HT-M7 |
| Category | Home Theater System |
| Language | English |
To Next Page
