41
US
Amplifier Operations
Adjusting the level
(LEVEL menu)
You can use the LEVEL menu to adjust the
level of each speaker.
Select “LEVEL” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 36) and
“Overview of the menus” (page 37).
LEVEL menu parameters
x T. TONE (Test tone)
Lets you adjust the speaker levels while
listening to the test tone from your listening
position. For details, see “8: Adjusting the
speaker levels (TEST TONE)” (page 31).
x FL LVL (Front left speaker level)
x CNT LVL (Center speaker level)
x FR LVL (Front right speaker
level)
x SR LVL (Surround right speaker
level)
x SL LVL (Surround left speaker
level)
x SW LVL (Subwoofer level)
Notes
• “CNT LVL” does not appear when you set
“CNT N” in the “SP SETUP” setting.
• “SR LVL” and “SL LVL” do not appear when you
set “SUR N” in the “SP SETUP” setting.
Adjusting the tone
(TONE menu)
You can use the TONE menu to adjust the
tonal quality (bass/treble level) of the
speakers.
Select “TONE” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 36) and
“Overview of the menus” (page 37).
TONE menu parameters
x BASS (Bass level)
x TREBLE (Treble level)
To Next Page
