Sony HT-SF360 - Changing the Brightness of the Display (DIMMER); Changing the Display Setting (DISPLAY)

55
US
Other Operations
Changing the brightness
of the display
(DIMMER)
You can change the brightness of the display.
1 Press AMP MENU.
“SET HDMI” appears on the display.
2 Press V/v repeatedly until
“CUSTOM” appears, then press
or b.
3 Press V/v repeatedly until
“DIMMER” appears, then press
or b.
4 Press V/v repeatedly to select
the brightness of the display,
then press .
• DIMMER Y: Low lighting.
• DIMMER N: Bright lighting.
5 Press AMP MENU.
The AMP menu turns off.
Changing the display
setting
(DISPLAY)
You can change the display setting.
1 Press AMP MENU.
“SET HDMI” appears on the display.
2 Press V/v repeatedly until
“CUSTOM” appears, then press
or b.
3 Press V/v repeatedly until
“DISPLAY” appears, then press
or b.
4 Press V/v repeatedly to change
the display setting, then press
.
• DSPL ON: The display appears all the
time.
• DSPL OFF: The display appears when
you operate the receiver.
5 Press AMP MENU.
The AMP menu turns off.