ICF-CDK70
11
SECTION 4
TEST MODE
CD SHIP MODE
Function to put tray of disc 1 into state of chuck for transportation
is installed in this set.
Procedure:
1. Turn the power on, and put it into the state that there is no CD
in the disc tray.
2. Press two keys of the [
x
] and [1] simultaneously.
3. The message “0000” is displayed and the tray is chucked.
CDM RESET
Mode to initialize CD mechanism deck.
Procedure:
1. Turn the power on.
2. Press the [
x
] key for fi ve seconds, and CD mechanism deck is
initialized.
PANEL TEST
Mode that test LCD, and display the version and destination.
Procedure:
1. Turn the power on.
2. Press three keys of the [
x
], [2] and [
.
] simultaneously.
Then all segments of liquid crystal display are turned on.
3. Press the [1] key, the destination and version are displayed.
4. Press the [2] key, the released date of the micro computer is
displayed.
5. To exit from this mode, perform the step 2.
To Next Page
Loading...
