Sony KD-55A9F - Self Diagnosis Mode Entry and Exit

Self Diagnosis
Entry (Self Diagnosis Display)
- Go to the standby by a remote.
- Push the buttons sequentially:
<Display><5><Vol-><Power>
Exit
-If you want to finish service mode app, do AC OFF/ON
→*Service mode app is disable perfectly
-if you want to move home menu, push <HOME>button
→*Service mode app do background(not disable perfectly)
Self Diagnosis Display
13
FY18 model (CS)
;
SELF CHECK
<<
002 MAIN POWER 000000000000 000000000000 000000000000 000
003 DC ALERT 000000000000 000000000000 000000000000 000
003 AUD ERR 150101000018 150101000018 150101000018 003
003 TU DEMOD 150101000218 150101000223 150101000105 003
003 AUD ERR I2C 000000000000 000000000000 000000000000 000
003 TU DEMOD I2C 000000000000 000000000000 000000000000 000
003 EARC ERR I2C 000000000000 000000000000 000000000000 000
004 LD ERR 000000000000 000000000000 000000000000 000
004 BCM ERR 000000000000 000000000000 000000000000 000
005 TCON ERR 150101000504 000000000000 000000000000 001
005 P ID ERR 000000000000 000000000000 000000000000 000
006 BACKLIGHT ERR 000000000000 000000000000 000000000000 000
007 TEMP ERR 150101000200 150101000002 000000000000 002
007 TEMP ERR I2C 000000000000 000000000000 000000000000 000
008 4KBE ERR 000000000000 000000000000 000000000000 000
Back
00005 00414 00002
[Home]Exit [Up/Down]Scroll
SYSSET
2018/09/1904:47:37(GMT+09:00)