Sony KD-55A9F - WB Data Transfer

81
4.6 WB data transfer
1. In “Panel/PQ” service mode
a. Go to “WB/Mura/CUC data transfer” category by “↑” or “↓”.
b. To select “WB/Mura/CUC data transfer”, press → button.
c. To change data , press “←” or “→” on remote commander.
2. In “WB/Mura/CUC data transfer”
a. Select “WB/Gamma data transfer” by pressing “↑” or “↓” on remote
commander .
b. To change the items, press “←” or “→” on remote commander and
press “Enter” button.
Selectable items are:
 0. SoC to T-con
 1. T-con to SoC
 2. No action
c. “Mura data transfer” is also displayed on the menu, but Mura function
does not work on CS model.
CUC function can work. (refer to next page).
Please skip these items by pressing “↓” on remote
commander .
d. Select “[start]” and press “Enter” button to start transfer.
Please apply BM3 board or panel is replaced.
SYSSET
2018/09/1904:47:37(GMT+09:00)