Help Guide
print.html[3/31/2021 7:15:59 AM]
SPEAKER IN terminal, you will need to perform the following steps to prevent
noise from the speakers.
Press the
(Quick Settings) button on the remote control, and disable [TV
center speaker mode] in [Settings] — [Display & Sound] — [Audio output].
[7] Getting Started
How the LEDs light up
You can check the status of the TV by looking at how the LEDs light up.
(A) Voice function LED (On the left side at the bottom of the TV. Only TVs with a built-in MIC. )
(B) Operational response LED (In the center at the bottom of the TV.)
The built-in MIC may not be available depending on your region/country/language.
Voice function LED
Turns “on” or “blinks” when “Ok Google” is detected and the TV is communicating with the server. The
lighting pattern of this LED depends on the server communication status.
Note
You can use the built-in MIC when the Built-in MIC switch is on. For the location of the Built-in
Mic Switch, refer to the Reference Guide supplied with the TV.
After you press the Google Assistant/MIC button on the remote control and finish activating the
built-in MIC, the voice function LED turns on in amber when the Built-in MIC switch is off (when
on, the Operational response LED turns on in amber).
Operational response LED
Turns “on” or “blinks” in white when the TV is turning on, when receiving signals from the remote
control, or when updating the software using a USB storage device.
*
*
To Next Page
Loading...
