Help Guide | Adjusting an audio system
04-04_02.html[3/31/2021 7:19:59 AM]
Help Guide
1
2
>
Using the TV with Other Devices
>
Audio system (such as an AV receiver or sound bar)
>
Adjusting an audio system
Print
Adjusting an audio system
After connecting an audio system to the TV, adjust the TV’s audio output
from the audio system.
Adjusting an audio system connected with
an HDMI cable or digital optical cable
After connecting the TV to your audio system, press the
(Quick Settings) button on the remote control, then select
[Settings] — [Display & Sound] — [Audio output] —
[Speakers] — [Audio system].
Turn on the connected audio system, then adjust the volume.
If you connect a BRAVIA Sync-compatible device with an HDMI
connection, you can operate it by simply using the TV’s remote
control.
Note
You need to configure the [Digital audio out] settings according to
your audio system. Press the
(Quick Settings) button on the
remote control, then select [Settings] — [Display & Sound] —
[Audio output] — [Digital audio out].
If the audio system is not compatible with Dolby Digital or DTS, set
[Settings] — [Display & Sound] — [Audio output] — [Digital audio
out] to [PCM].
The [Digital audio out] settings are disabled when using audio
signals that are passed through from the HDMI input and using
Getting Started
Useful features
Watching TV
Using the TV with Other Devices
Connecting to a Network
Settings
Troubleshooting
Index/Other
To Next Page
Loading...
