Help Guide
print.html[3/31/2021 7:15:59 AM]
Adjusting home network settings
You can adjust the following home network settings.
To check the server connection
Press the (Quick Settings) button on the remote control, then select [Settings] — [Network &
Internet] — [Home network] — [Server diagnostics] — follow the on-screen instructions to perform
diagnostics.
To use the renderer function
Press the (Quick Settings) button on the remote control, then select [Settings] — [Network &
Internet] — [Home network] — [Renderer] — the desired option.
[Renderer]
Enable the renderer function.
You can play photo/music/video files in a controller (e.g., digital still camera) on the TV screen by
operating the device directly.
[Renderer access control]
Select [Auto access permission] to access the TV automatically when a controller accesses the
TV for the first time.
Select [Custom settings] to change the access permission settings of each controller.
To use the remote device
Press the (Quick Settings) button on the remote control, then select [Settings] — [Network &
Internet] — [Remote device settings] — the desired option.
[Control remotely]
Enable operation of the TV from a registered device.
[Deregister remote device]
Deregister a device to disable operation of the TV from that device.
[76] Home network features | Home network features
Playing content from a computer
To Next Page
Loading...
