Help Guide
Wireless Stereo Headset
LinkBuds Open
Making a call
You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free
Profile) or HSP (Headset Profile), via a Bluetooth connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied
with the smartphone or mobile phone.
Depending on the connected device or the application you are using, the functions may not work properly even if you
try to operate them with the headset.
Connect the headset to a smartphone or mobile phone via a Bluetooth connection.
1
Operate your smartphone or mobile phone to make a call.
When you make a call, the dial tone is heard from the headset.
If you make a call while listening to music, playback pauses automatically.
If playback is not paused, operate the headset to pause playback.
You can talk using the microphones (A) on the left and right headset units.
If no dial tone is heard via the headset
Use your smartphone or mobile phone to transfer the call to the headset.
2
Operate the smartphone or mobile phone to adjust the volume.
3
When you finish talking, tap the left or right unit of the headset or the area near your ear 3 times quickly
(with an interval of about 0.2 seconds) to end the call.
If you made a call during music playback, music playback resumes automatically after ending the call.
4
To Next Page
Loading...
