Help Guide
Wireless Stereo Headset
LinkBuds Open
Using Voice Control
There are three languages that can be used: "Japanese", "English", and "Chinese”.
You can use the Voice Assistant Function of the connected device by speaking the following words instead of the
wake word.
Japanese: アシスタント
English: Assistant
Chinese: 语⾳助⼿
When the command is hard to detect
Repeat the command clearly in a loud voice.
If your surroundings are noisy, your voice may not be recognized properly.
If the headset volume is too loud, your voice may not be recognized properly.
After you say “アシスタント”, “Assistant” or “语⾳助⼿”, it may take about 2 seconds for the Voice Assistant Function
to start up.
5-056-451-11(2) Copyright 2024 Sony Corporation
Make the following settings with the “Sony | Sound Connect” app.
Set [Voice Control / Voice Assistant] to [Operate headphones with Voice Commands]
Set the language in [Voice Control Language Setting]
1
Speak the wake word.
You can use the following words as wake words:
Japanese: ハローヘッドホン
English: Hey, Headphones
Chinese: Hey, 你好
You will hear a notification sound indicating that the wake word has been accepted, and the system will wait for a
voice command input for approx. 8 seconds.
2
Enter voice commands to operate the headset while waiting for input.
You can check available voice commands on the “Sony | Sound Connect” app.
3
To Next Page
Loading...
