About the charging time
The required time for fully charging the headset and the charging case is about 2.5 hours
*
.
Charging the headset when you are outside
A rechargeable battery is built into the charging case. If you charge the charging case in advance, you can use it to
charge the headset when you go out without a power supply.
The required time for fully charging the left and right headset units is about 1.5 hours.
System requirements for battery charge using USB
USB AC adaptor
A commercially available USB AC adaptor capable of supplying an output current of 0.5 A (500 mA) or more
Personal computer
Personal computer with a standard USB port
We do not guarantee operation on all computers.
Operations using a custom-built or homebuilt computer are not guaranteed.
Hint
The headset can be also charged by connecting the charging case to a running computer using the supplied USB Type-C cable.
Note
Be sure to use the supplied USB Type-C cable. Otherwise, charging may not be successful.
Charging may not be successful depending on the type of USB AC adaptor.
The left or right headset unit works as the main headset unit, so it consumes the rechargeable battery faster than the other unit.
There is a difference in charging time between the left and right headset units, but this is not a malfunction.
The left or the right headset unit can be the “main headset unit” depending on the usage environment.
The headset cannot be charged when the computer goes into standby (sleep) or hibernation mode. In this case, change the
computer settings, and start charging once again.
Charging starts on the headset and charging case. The indicator (orange) on the charging case lights up.
After charging is complete, the indicator on the charging case turns off.
Remove the USB Type-C cable.
Time required for charging the empty battery to its full capacity. The charging time may differ depending on the conditions of use.
*
To Next Page
Loading...
