While charging the headset units / While charging the charging case
(lights up in orange)
When the battery is fully charged when charging starts on the headset units/charging case
- - - - - (lights up in orange for about 1 minute, and then turns off)
When the battery becomes fully charged and charging is complete
- - - - - - - (turns off)
During charging, when the charging case lid is opened or closed / When the headset units are set in or removed from
the charging case
- - - - - - (lights up in orange while charging. turns off for about 0.5 seconds,
and then lights up in orange again)
Abnormal charging temperature
- - - - - - - - - - - - - - - (repeatedly flashes twice in orange with an interval of about 1 second)
When an error occurs while charging and charging cannot be performed / When the headset is placed in the charging
case with the left and right sides reversed
- - - - - - - - - - (repeatedly flashes slowly in orange with an
interval of about 0.5 seconds)
Abnormal combination of left and right headset units
- - - - - - - - - - - - (repeatedly flashes 3 times in orange with an interval of about 1.3 seconds)
Bluetooth connection status
Pairing mode
- - - - - - - - - - - - - - (repeatedly flashes twice in blue)
Connection process completed
... (flashes 10 times in blue)
Indicates when one or both headset units are stored in the charging case.
Other
When the charging case lid is opened while the software is updating automatically
- - - - - - - - - - - - - - - (repeatedly flashes in orange and blue with an interval of about 0.6 seconds)
Reset start preparation / Initialization start preparation
- - - - - - - - - (repeatedly flashes in orange for up to about 5 seconds with an interval
of about 0.7 seconds about 15 seconds after you first press the reset/initialize button on the back of the charging
case)
For details, see “Resetting the headset” or “Initializing the headset to restore factory settings”.
Initialization completed
- - - (flashes 4 times in green with an interval of about 0.3 seconds)
For details, see “Initializing the headset to restore factory settings”.
Hint
When the headset is worn, you can check various statuses of the headset by the notification sound or voice guidance.
Related Topic
Charging
Checking the remaining battery charge
What you can do with the “Sony | Sound Connect” app
How to keep the software up-to-date (for comfortable use of the headset)
To Next Page
Loading...
