Help Guide
Wireless Stereo Headset
LinkBuds Open
Using Quick Access
Quick Access is a feature that allows you to play content in the corresponding app by simply tapping the headset or the
area near your ear.
Hint
To use Quick Access, you need to install the corresponding smartphone app and connect to the Internet. Some apps will require
you to sign in.
For details on the latest specifications of Quick Access, refer to the “Sony | Sound Connect” app.
You can also assign the same service to double-tap and triple-tap of Quick Access.
If the corresponding app is not launched even when operating the headset unit to which Quick Access is assigned, the voice
guidance “App assigned to the Quick Access is not launched on the mobile device” is heard from both headset units (or from the
headset unit you are wearing).
Note
The services that can be assigned to Quick Access differ depending on the countries and regions.
Related Topic
What you can do with the “Sony | Sound Connect” app
What you can do with partner services
Put the headset units into your ears and connect the headset to the smartphone via Bluetooth connection.
1
Open the “Sony | Sound Connect” app and set the function of either the left or right headset unit as Quick
Access.
You can change the function assignments to the left and right units of the headset using the “Sony | Sound
Connect” app.
2
Assign the services you want to link to Quick Access with the “Sony | Sound Connect” app.
You can assign the different services to double-tap and triple-tap.
3
Launch the app of the service assigned for Quick Access.
4
Tap the headset or the area near your ear to which you assigned the feature quickly (with an interval of
about 0.2 seconds between taps) to use Quick Access.
Double-tap or triple-tap to run the corresponding service assigned in the previous steps.
5
To Next Page
Loading...
