The headset turns on automatically.
The headset enters pairing mode automatically.
When you are wearing the headset, you will hear a notification sound from both headset units at the same time, and
you will hear a voice guidance say “Pairing”. When you are wearing only one headset unit, you will hear the
notification sound and voice guidance from the headset unit you are wearing.
Proceed to step 4.
(If you selected “the headset has pairing information for other devices” in step 1)
Set the headset into the charging case, leave the charging case lid open, and press and hold the pairing
button on the back of the charging case for about 5 seconds or more.
Hint
Leave the charging case lid open. The headset does not enter pairing mode with the charging case lid closed.
3
To Next Page
Loading...
