Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the computer.
Note
If the music playback sound quality is poor, check that the A2DP function which supports music playback connections is enabled
in the computer settings. For more details, refer to the operating instructions supplied with the computer.
If the last connected Bluetooth device is placed near the headset, the headset may automatically connect to the device when you
turn on the headset and may not connect to another device.
You will hear a notification sound indicating that the connection is established from both headset units at the same
time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you
are wearing.
On the [Recording] tab, select [LinkBuds Open], right-click it, and select [Connect] from the displayed
menu.
8
To Next Page
Loading...
