Sony MHC-D60 - Recording from a Tape

18
Recording from a
tape
— High-speed Dubbing
4 Press ∏.
Dubbing starts.
To stop dubbing
Press π on deck A or B.
Tips
• When you dub on both sides, start recording from
the front side. If you record from the reverse side,
recording stops at the end of the reverse side.
• If you set DIRECTION to a when the tapes you
use have different lengths, the tape in each deck
reverses independently. If you select RELAY, the
tapes in both decks reverse together.
• You don’t have to set DOLBY NR, since the tape in
deck B is automatically recorded in the same state
as the tape in deck A.
You can use TYPE I (normal) or TYPE II
(CrO2) tapes. The recording level is
automatically adjusted.
1 Press § EJECT and insert a
recorded tape in deck A and a blank
tape in deck B.
2 Press HIGH SPEED DUBBING.
Deck B stands by for recording.
3 Press DIRECTION repeatedly to
select A to record on one side.
Select a (or RELAY) to record on
both sides.
·∏
‚º
π
ª·
§
§ §
π
0)
‚º
π
ª·
POWER
11
ππ
24
With the side
you want to
play/record
facing forward
§
‚º
π
ª·

3
DOLBY
NR
Downloaded From Disc-Player.com Sony Manuals