Chapter 12 Setup Menus
Chapter 12 Setup Menus 12-21
Menu items in the range 651 to 699, relating to the UMID (Continued)
Item number Item name Settings
657 ESSENCE MARK TAPE
OUTPUT
Select whether or not to output essence marks recorded on the tape during
playback.
off : Do not output.
on: Output.
658 SHOT MARK ESSENCE
MARK CONVERT
Select whether or not to convert into essence marks and output shot marks
recorded in the LTC track which are detected during playback.
off : Do not output.
SHOTM: Output.
Depending on the type of the detected shot marks, the output essence marks are
“_RecStart”, “_ShotMark1”, or “_ShotMark2”.
Notes
• Of the shot marks, post marks are not converted to essence marks.
• Shot mark detection timing depends on playback conditions.
659 AED ESSENCE MARK
CONVERT
Select whether or not to convert into essence marks and output events detected
during playback by the AED (Auto Event Detector).
off : Do not output.
on: Output.
660 ESSENCE MARK SD
VANC LINE
Specify the VANC line into which to insert essence marks during video recording
and playback.
12H, 13H, 15H, 16H, 17H , 18H, 19H (MSW-M2000/A2000/M2000E)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H , 18H
(MSW-M2000P/A2000P/M2000EP)
Notes
• The output VANC line during playback follows the setting for recording.
• The VANC line for SDI signal E-E output of essence marks contained in the
input SDI signal follows the input.
Select whether or not to record to tape essence marks generated by this unit
when recording video.
Select whether or not to record essence marks during crash recording.
off : Do not record.
on: Record “_RecStart” essence mark in the recording start frame.
661 ESSENCE MARK INPUT
RECORD
Select whether or not to record essence marks contained in the video input.
off : Do not record.
on: Record.
662 ESSENCE MARK SELF
RECORD
Sub items
1 crash rec
2 assemble
3 insert
Select whether or not to record essence marks during assemble edit recording.
off : Do not record.
on: Record “_RecStart” essence mark in the recording start frame.
Select whether or not to record essence marks during insert edit recording.
off : Do not record.
on: Record “_RecStart” essence mark in the recording start frame, and record
“_RecEnd” essence mark in the recording end frame.
To Next Page
Loading...
