Chapter 2 Location and Function of Parts
Chapter 2 Location and Function of Parts 2-3
6 Format indicators
The BETACAM/SP
a)
, BETACAM SX, MPEG IMX,
or Digital BETACAM
b)
indicator lights depending on
the current recording or playback format.
The BETACAM/SP indicator lights when the format is
Betacam or Betacam SP.
a) The MSW-2000 does not have the Digital BETACAM
and BETACAM/SP indicator.
b) The MSW-A2000/A2000P does not have the Digital
BETACAM indicator.
7 PHONES jack and control
Connect stereo headphones with an impedance of
8 ohms, to monitor the sound during recording,
playback and editing.
The control knob adjusts the volume.
It is possible to set an internal board switch so that the
output volume from the MONITOR OUTPUT L and R
connectors is controlled simultaneously.
For details, refer to the Installation Manual.
To Next Page
Loading...
