Sony MVS-3000 System - Video Transitions Using Cuts

47
Video Switching (Transitions)
Basic Image Creation Operations
Video Transitions using Cuts
In a cut, the video changes with the single press of a button.
The following describes the M/E-1 bank, as an example.
1 Push the fader lever up to display the background A
image full-screen.
Transition control block
2 Select the video you want to display first.
a In the background A row of the cross-point control
block, press the cross-point button assigned with
the selected video.
Cross-point control block
Background A video before the transition
3 Select the video you want to display after the
transition.
a In the background B row of the cross-point control
block, press the cross-point button assigned with
the video for post-transition.
4 Execute the transition.
a Press the [CUT] button in the transition control
block.
Transition control block
The transition is executed, interchanging the cross-
points in the background A and B rows.
Cross-point control block
Background A video after the transition
Fader lever
Background A row
Background B rowLit buttons
CUT button
Background A row
Background B rowLit buttons are
interchanged