Sony MVS-3000 System - Page 51

51
Saving DME Wipe Settings in a DME Wipe Snapshot
Basic Image Creation Operations
Modify menu
b Adjust the [H] parameter to set the horizontal
position.
c Adjust the [V] parameter to set the vertical position.
Size and position adjustment
6 Set the border.
a Open the M/E-1 >DME Wipe >Edge/Direction
menu (1164).
Edge/Direction menu
b In the <Edge> group, press [Border], turning it on.
c Adjust the [Width] parameter to set the width of the
border.
d Adjust the [Luminance], [Saturation], and [Hue]
parameters to set the color of the border.
Border color setting example
Position
VH
Width
Hue
Saturation
LuminanceBorder
Border