14
Recording an MD right away!
Connect to a digital source using an optical cable (supplied) to make
digital recordings. Digital recording is possible even from digital
equipment with different sampling rates, such as a DAT deck or a BS
tuner, using the built-in sampling rate converter. To record from an
analog source, see “Recording with analog input (line cable
required)” (page 23). To record from an MD, see “Note on digital
recording” (page 54).
Using the AC power adaptor (supplied) is recommended
for recording.
1
Make connections.
(Insert the cables firmly and completely
into the appropriate jacks.)
to a wall outlet
AC power adaptor
(supplied)
CD player, MD
player, DVD
video player, etc.
Portable CD
player, etc.
Optical cable
(supplied)*
Optical
plug
Optical
mini-
plug
to DIGITAL OUT
(OPTICAL)
to LINE IN (OPTICAL)
to DC IN 3V
∗ The supplied cable consists of one or the other of these cables.
The shape of the plugs on the supplied cable may differ,
depending on where the recorder was purchased.
To Next Page
Loading...
Need help?
General
