46
2 Press <MENU, (flip the lever towards > or .)
repeatedly until “EDIT” flashes in the display, and then press
ENTER (ENTER) again.
“ :Name” flashes in the display and the recorder plays the
selected track repeatedly.
3 Press <MENU, (flip the lever towards > or .)
repeatedly until “ :Move” flashes in the display, and then
press ENTER (ENTER).
For the example above, “MV 003 t 003” appears in the display.
4 Press <MENU, (flip the lever towards > or .) to
select the destination track number.
For the example above, “MV 003 t 002” appears in the display.
To cancel moving, press T MARK (T MARK).
5 Press ENTER (ENTER) again.
The track moves to the selected destination track.
To Next Page
Loading...
