Sony MZ-R90/R91 - On the Remote Control

34-GB
On the remote control
Labeling a disc during stop
1 Insert a disc.
To label a disc that is already in the
recorder, press x to stop.
2 Press DISPLAY for 2 seconds or
more.
“ :Name” flashes in the display.
3 Press x.
The disc is ready to be labeled.
4 Press the control towards . or
towards N • > to select a letter
and press x to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
5 Repeat step 4 and enter all characters
of the label name.
To cancel labeling, press DISPLAY
for 2 seconds or more.
6 Keep pressing the x for 2 seconds or
more.
The track or disc is labeled.
Labeling a track during
playback
1 Insert a disc and play the track you
want to label.
2 Press DISPLAY for 2 seconds or
more.
“ :Name” flashes in the display.
3 Press x.
The track is ready to be labeled.
4 Follow steps 4 to 6 of “Labeling a
disc during stop” (page 34).
Labeling a track or a disc
during recording
1 Press DISPLAY for 2 seconds or
more during recording.
“ :Name” flashes in the display.
Press/ Turn To
X Switch between
capital letters,
small letters,
marks / numbers,
and phrases.
1)
VOL +/– Move the cursor to
the left or right.
./
N • >
Change the letter to
the one before /
next one.
DISPLAY
PLAYMODE
VOL +/–
X
x
Control
DISPLAY Insert a blank space
to type in a new
letter by pressing
within 2 seconds.
Cancel labeling by
pressing for 2
seconds or more.
PLAYMODE Delete a letter and
move back all
following letters to
the left.
1)
If phrases are stored in the phrase bank,
the first phrase stored appears in the
display(page 37).
Press/ Turn To