54
Changing/checking the settings in your
camcorder
You can turn on and off the display of the
time code, and other information on the
screen.
Press the DISPLAY button B.
The screen indicators turn on (displayed)
and off (not displayed) as you press the
button.
In the recording mode, the screen changes
like “detailed display t simple display t
no display” as you press the button.
z Tips
• You can display the screen indicators during
playback on a TV. Select [ALL OUTPUT] of
[DISPLAY OUTPUT] (p. 78).
You can display information, including
date, time, camera data and GPS
triangulation data automatically stored
during recording on the screen during
playback.
Press the DATA CODE button A
during playback or pause.
The screen changes like “date and time
display t camera data display t GPS
triangulation data t no display” as you
press the button.
A White balance
appears during playback of the
movie recorded with [MANU WB
TEMP].
B Shutter speed
C Iris
D Gain
E Exposure
appears during playback of the
movie recorded with the iris, gain or
shutter speed automatically adjusted.
appears during playback of the
movie recorded with the iris, gain or
shutter speed manually adjusted.
F SteadyShot
Changing the screen
Displaying recording data (Data
code)
To Next Page
