Item Description
Network SSID
Security type
Page indicator
Page turn icon
Wi-Fi is activated and the Reader detects an unsecured network.
Wi-Fi is activated and the Reader detects a secured network. The Wi-Fi router to which
you want to connect requires a password. A password may also be called a WEP
key/WPA key/encryption key/network key, etc.
2. Tap your Wi-Fi router’s SSID (Service Set Identifier) in the [Wi-Fi Networks] list.
3. If prompted for a password, tap the input area and type in the password using the on-screen
keyboard.
4. Tap [Connect].
The wireless connection status is displayed in the status bar.
5. The [Browser] application may start automatically to connect to a public access point.
Otherwise, start the [Browser] application manually; press the
(Home) button, tap
[Browser].
6. The browser screen may show further information about completing the connection. Follow
any instruction(s) where applicable.
For more technical notes, see Details.
Manually setting a Wi-Fi connection
You can set up a Wi-Fi network connection manually by inputting the required information for
connection. Make sure to turn on [Wi-Fi] and tap [Wi-Fi Settings] on the [Wireless Network
Settings] screen. Alternatively, you can turn on [Wi-Fi] by tapping the status bar and tapping [Wi-
Fi Settings].
1. Tap [Add Wi-Fi Network].
To Next Page
Loading...
