EasyManuals Logo

Sony RCD-W3 User Manual

Sony RCD-W3
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
Playing in Random Order
(Shuffle Play)
You can have the recorder “shuffle” tracks and
play them in random order.
Before using the remote, set SELECT to CD
for operations on DECK A, or to CDR for
operations on DECK B.
While the recorder is stopped or playing, press
SHUFFLE PLAY on the remote until
“SHUFFLE” appears in the front panel display.
To stop Shuffle Play
Press x.
Tip
To play from the beginning of the current track again,
press AMS .. You cannot use AMS . to go
back to tracks that have already been played.
Note
“REPEAT 1” is canceled if you set Shuffle Play.
Creating Your Own
Program (Program Play)
You can specify the playback order of the
tracks on a disc to create your own programs
containing up to 20 tracks.
Before using the remote, set SELECT to CD
for operations on DECK A, or to CDR for
operations on DECK B.
Note
You cannot create a program containing tracks from
both DECK A and DECK B.
1 While the recorder is stopped, press
PROGRAM on the remote until “PGM”
appears in the front panel display.
2 Press > on the remote until the
desired track appears, then press
PROGRAM on the remote.
3 To program additional tracks, repeat
Step 2.
4 Press H to start Program Play.
To stop Program Play
Press x.
To cancel Program Play
While the recorder is stopped, press
PROGRAM on the remote until “PGM”
disappears.
To select the desired track using the
number buttons
Press the number buttons instead of performing
Step 2.
PROGRAM
SHUFFLE
PLAY

Other manuals for Sony RCD-W3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony RCD-W3 and is the answer not in the manual?

Sony RCD-W3 Specifications

Power IconPower
power requirementsU.S.A. and Canada 120 V AC, 60 Hz
power requirements other countries110 – 240 V AC, 50/60 Hz
power consumption20 W
Audio Specifications IconAudio Specifications
frequency response20 Hz – 20, 000 Hz (±0.5 dB)
signal-to-noise ratioMore than 100 dB
dynamic rangeMore than 95 dB
Inputs IconInputs
analog in impedance47 kilohms
rated input330 mVrms
minimum input125 mVrms
Outputs IconOutputs
analog out rated output2 Vrms (at 50 kilohms)
load impedanceover 10 kilohms
phones28 mW, 32 ohms
Weight and Dimensions IconWeight and Dimensions
dimensions430 × 108 × 368 mm
mass4.6 kg

Related product manuals