SA-WCT770
REVISION HISTORY
Ver. Date Description of Revision
1.0 2014.02 New
1.1 2014.06 Addition of Chinese, Saudi Arabia, Singapore and Taiwan models
Change of SUB KEY, SUB LED and SUB MAIN boards (Suffi x-12)
Change of Part for Ref. No. R900 on the SUB LED board
(SMR-13060)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
To Previous Page
Loading...
