Sony SDM-N50 - 2 Disassembly; U Board Removal; Base Assembly Removal

SDM-N50
SECTION 2
DISASSEMBLY
2-1. U BOARD REMOVAL
2-1
2-2. BASE ASSEMBLY REMOVAL
CN402
CN406
2
Two screws
(+P 3 x 5)
4
Base assembly
1
Two screws
(+P 3 x 5)
3
Base hinge
LCD module (TFT)
Cushion
* Remove the U board refering 2-1.
CN404
CN406
CN402
CN405
1
Open these hinge covers (F) and (R) by the
– screw driver and so on.
* When open the hinge cover (R), these claws
in figure would be break so replace new parts.
Hinge cover (F)
Claws
Hinge cover (R)
Cushion
6
Remove the U board
in the direction of allow.
Shield case U
5
Three screws
(+BVTP 3 x 8)
2
Two screws
(+PS 4 x 6)
3
Five screws
(+KTP 3 x 14)
4
Base