Sony SDM-P232W - Setup; Setup 1: Connect a Computer Equipped with a DVI Output Connector (Digital RGB); Setup 2: Connect a Computer Equipped with an HD15 Output; Connector (Analog RGB)

7
US
Setup
Before using your monitor, check that the following items are
included in your carton:
•LCD display
• Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
• Windows Utility/Macintosh Utility Disk
• Warranty card
• This instruction manual
Setup 1:Connect a computer
equipped with a DVI
output connector (digital
RGB)
1 Remove the back cover.
2 Using the supplied DVI-D video signal cable (digital
RGB), connect the computer to the monitor’s DVI-D
input connector (digital RGB) for INPUT1 or INPUT2.
Setup 2:Connect a computer
equipped with an HD15
output connector (analog
RGB)
1 Remove the back cover.
• Turn off the monitor and computer before connecting
them.
• When connecting the computer to the monitor’s HD15
input connector (analog RGB), refer to “Setup 2:
Connect a computer equipped with an HD15 output
connector (analog RGB).”
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
Turn off the monitor and computer before connecting
them.
Note
Do not touch the pins of the video signal cable connector as this might
bend the pins.
to the computer’s DVI
output connector
(digital RGB)
DVI-D video signal
cable (digital RGB)
(supplied)
to the DVI-D input
connector (digital RGB)
for INPUT1 or INPUT2
(continued)