Sony SLV-ED8ME - Board Removal (EZ9); Control Switch Block Removal (EZ9); Board Removal (ED8;EZ8); Mechanism Deck Removal

2-2
2-5. FR-137, DM-77, SW-307, IO-64 BOARD
REMOVAL (EZ9)
2-8. MECHANISM DECK REMOVAL
2-6. CONTROL SWITCH BLOCK REMOVAL
(EZ9)
2-7. FR-137, DM-77, IO-64 BOARD
REMOVAL (ED8/EZ8)
8 DM-77 board
!™ IO-64
board
1 Flat cable
(CN309)
5 Flat cable
(CN308)
9 Flexible board
(CN451)
6 Flexible board
(CN302)
7 Four screws
(B2.6 × 8)
3 Four screws
(B2.6 × 8)
2 Screw
(B2.6 × 8)
4 FR-137 board
!¡ SW-307 board
0 Two screws
(B2.6 × 8)
5 Control switch block
2 Damper holder
4 Fulcrum plate
(right) assembly
1 Two screws
(B2.6 × 8)
3 Screw
(B2.6 × 8)
8 IO-64 board
4 Flexible board
(CN451)
2 Four screws
(B2.6 × 8)
1 Nine screws
(B2.6 × 8)
3 FR-137 board
5 Connector
(CN307)
6 DM-77 board
7 Screw
(B2.6 × 8)
1 Flexible board
5 Screw
(BVTP3 × 12)
4 Screw
(B3)
6 Two screws
(BVTP3 × 12)
7 Mechanism deck
3 Connector
(FE head)
2 Connector
(ACE head)
Note: When mounting the mechanism deck,
first align ¢ mark on the rotary switch.