28
GB
(Except for South Africa and
Argentina models)
A USB cable (not supplied)
5: Connecting the
antennas (aerials)
Before connecting antennas (aerials), be sure
to disconnect the AC power cord (mains lead).
*The shape of the connector varies depending on
the area of this receiver.
Notes
•To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and other
equipment.
•Be sure to fully extend the FM wire antenna
(aerial).
•After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
Connecting a USB device
USB device
A
FM wire antenna (aerial)
(supplied)
AM loop antenna (aerial)
(supplied)
To Next Page
Loading...
Need help?
General
