38
GB
3 Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
Tip
Adjust the direction of the AM loop antenna
(aerial) for optimum reception upon tuning to
an AM station.
4 Press ENTER.
If you cannot tune to a station
“–––.––MHz” or “––––kHz” appears and
then the display panel returns to the current
frequency.
Make sure you have entered the right
frequency. Try repeating steps 2 to 4. If you
still cannot tune to a station, the frequency
may not be in use in your area.
(Latin America, Argentina and
Mexico models only)
You can change the AM tuning scale to either
9 kHz or 10 kHz.
1 Press TUNER repeatedly (or
press AM) to select AM.
2 Press AMP MENU.
3 Press V/v repeatedly to select
“TUNER”, then press or b.
4 Press V/v repeatedly to select
“AM STEP”, then press or b.
5 Press V/v repeatedly to select
the AM tuning scale you want.
Note
All AM preset stations will be erased when you
change the tuning scale.
Presetting FM/AM radio
stations
You can store up to 30 FM and 30 AM stations
as your favorite stations as preset stations.
1)
RM-AAU135 only.
2)
RM-AAU136 only.
1 Press TUNER repeatedly (or
press FM or AM) to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Tune to the station that you
want to preset using Automatic
Tuning (page 37) or Direct
Tuning (page 37).
3 Press MEMORY.
Changing the AM tuning scale
PRESET
+/–
Numeric
buttons
ENTER
AMP
MENU
,
V/v/B/b
MEMORY
AM
2)
TUNER
1)
/
FM
2)
To Next Page
Loading...
Need help?
General
