35
GB
Basic Operations
•Compatibility with all encoding/writing
softwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or
interrupted audio or may not play at all.
•Some time may be needed to start playback
when:
– the folder structure is complex.
– the memory capacity is excessive.
•This receiver does not necessarily support
all the functions provided in a connected
USB device.
•The playback order for the receiver may
differ from the playback order of the
connected USB device.
•Folders that have no audio files are skipped.
•When playing a very long track, some
operations may cause playback delay.
USB message list
Viewing information on
the display panel
The display panel provides various
information of the receiver status such as
sound field.
1 Press the corresponding input
button which you want to check
the information.
2 Press DISPLAY repeatedly.
Each time you press the button, the
display changes cyclically as follows:
Index name of the input* t Selected
input t Sound field currently applied t
Volume level t Stream info**
When listening to FM and AM radio
Preset station name* t Frequency t
Sound field currently applied t Volume
level
*Index name appears only when you have
assigned one to the input or preset station
(page 32, 39). Index name does not appear
when only blank spaces have been entered,
or it is the same as the input name.
**Stream information may not be displayed.
Message and explanation
READING
The receiver is recognizing and reading information
of the USB device.
DEVICE ERROR
The memory of the USB device could not be
recognized (page 33).
NO SUPPORT
An unsupported USB device is connected, an
unknown device is connected, or the
USB device is connected through a USB hub
(page 33).
NO.DEVICE
No USB device is connected or the connected USB
device is not recognized.
NO TRACK
No track was found.
Input
buttons
DISPLAY
AMP
MENU
continued
To Next Page
Loading...
Need help?
General
