24
GB
Amplifier/Tuner Operation
Selecting the component
1 Rotate FUNCTION to select the
function.
The selected function appears in the display.
To select the Display
VCR VIDEO 1 or VIDEO 2
Camcorder or VIDEO 3
TV game
DVD or LD player DVD/LD
Satellite tuner TV/SAT
MD or tape deck MD/TAPE
CD or Super Audio CD/SACD
CD player
Built in tuner TUNER
Turntable PHONO
2 Turn on the component and start
playback.
When you select a component which is also
connected to the TV (such as VCR or DVD
player), turn on the TV and set the TV’s
video input to match the component you
selected.
If your TV is connected to the receiver’s
MONITOR jack, the video from the
selected function will be displayed on the
TV.
3 Rotate MASTER VOLUME to adjust the
volume.
To mute the sound
Press MUTING on the remote.
To turn off the speaker system
Press SPEAKERS ON/OFF on the front panel.
Listening to multi channel
sound
(MULTI CH DIRECT)
You can select the audio directly from the
components connected to the MULTI CH IN
jacks. This function enables you to enjoy high
quality analog sources like DVD or Super
Audio CD.
Surround effects are not activated when using
this function.
Press MULTI CH DIRECT to select the
multi channel audio source.
The selected audio source is output.
Note
This function is canceled when you switch the
function (page 24), and press MULTI CH DIRECT
again.
To Next Page
Loading...
Need help?
General
