Advanced Adjustments and Settings
39
GB
Adjusting the equalizer
You can adjust the tonal quality (bass, treble
level) of front speakers using the EQ menu.
1 Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
2 Press EQ.
3 Press the cursor buttons ( or ) to
select the parameter.
For details, see “EQ menu parameters”
below.
4 While monitoring the sound, turn the
jog dial to adjust the selected
parameter.
5 Repeat steps 3 and 4 to adjust the other
items.
EQ menu parameters
x BASS XXX.X dB
(Front speaker bass level)
x TREB. XXX.X dB
(Front speaker treble level)
Initial setting: 0 dB
You can adjust from –10 dB to +10 dB in 0.5 dB
steps.
Level
(dB)
Frequency
(Hz)
Frequency
(Hz)
Bass
Treble
To apply equalization
Press EQUALIZER. Each press turns the
equalizer on or off. The EQ indicator lights
when the equalizer is on.
For advanced EQ menu adjustments
Use the CUSTOMIZE menu and set “MENU”
to “MENU EXP.” to enable advanced
adjustments.
For details on “MENU”, see page 40.
For details on how to set the items, see page 46.
To Next Page
Loading...
Need help?
General
