Sony STR-DG820 - SURROUND, EQ, TUNER Menu Parameters; AUDIO and HDMI Menu Parameters

45
US
Amplifier Operations
a)
For details, see the page in the parentheses.
b)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, SW).
c)
Depends on the speaker pattern setting, some parameters may not be available.
d)
Depends on the speaker pattern setting, some settings may not be available.
e)
This parameter is only available if the XM Mini-Tuner and Home Dock is connected to the XM jack on the
receiver.
f)
This parameter is only available when HDMI input signals is detected.
SURROUND
[SURROUND]
(page 50)
Sound field selection
[S.F. SELECT]
For details, see “Enjoying Surround
Sound” (page 55).
Enhanced surround mode
[E.SUR MODE]
PLII
d)
, PLIIx
d)
, NEO6 CIN, NEO6
MUS, NEURAL-THX
PLIIx
Effect level
a)
[EFFECT]
EFCT. 50%, EFCT. 80%, EFCT.
100%, EFCT. 150%
EFCT. 100%
EQ
[EQ]
(page 51)
Front speakers bass level
[BASS]
BASS -10 dB to BASS +10 dB
(1dB per step)
BASS 0 dB
Front speakers treble level
[TREBLE]
TREBLE -10 dB to TREBLE +10 dB
(1dB per step)
TREBLE 0 dB
TUNER
[TUNER]
(page 51)
FM station receiving mode
a)
[FM MODE]
STEREO, MONO STEREO
Naming preset stations
a)
[NAME IN]
For details, see “Naming preset
stations” (page 67).
XM antenna aiming mode
e)
[XM ANT AIM]
For details, see “Aiming the XM
antenna (aerial)” (page 69).
XM Radio ID
e)
[XM ID]
For details, see “Checking the XM
Radio ID” (page 69).
AUDIO
[AUDIO]
(page 52)
Synchronizes audio with video
output
a)
[A/V SYNC]
0 ms to 300 ms
(10 ms per step)
0 ms
Digital broadcast language
selection
a)
[DUAL MONO]
MAIN/SUB, MAIN, SUB MAIN
Digital audio input decoding
priority
a)
[DEC. PRIO.]
DEC. AUTO, DEC. PCM DEC. AUTO
Digital audio input assignment
a)
[D. ASSIGN]
For details, see “Listening to digital
sound from other inputs (DIGITAL
ASSIGN)” (page 83).
HDMI
[HDMI]
(page 53)
Control for HDMI
a)
[CTRL:HDMI]
CTRL ON, CTRL OFF CTRL OFF
Setting HDMI audio input
a)
[AUDIO OUT]
AMP, TV+AMP AMP
Subwoofer level for HDMI
a)f)
[SW LEVEL]
SW AUTO, SW 0 dB, SW +10 dB SW AUTO
SYSTEM
[SYSTEM]
(page 54)
Naming inputs
[NAME IN]
For details, see “Naming inputs”
(page 87).
Brightness of the display
a)
[DIMMER]
100% DOWN, 60% DOWN,
0% DOWN
0% DOWN
Menu
[Display]
Parameters
[Display]
Settings Initial
setting