Sony STR-DG820 - Assigning Digital Audio Inputs (DIGITAL ASSIGN)

83
US
Other Operations
Notes
• Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function is selected,
audio input is set to “ANALOG” automatically and
you cannot select other modes.
• When either XM Radio or DIGITAL MEDIA
PORT adapter is selected, “------” appears on the
display, and you cannot select other modes. Select
an input mode other than the satellite tuner and
DIGITAL MEDIA PORT adapter then set the
audio input mode.
Listening to digital sound
from other inputs
(DIGITAL ASSIGN)
You can reassign digital audio input that has
OPTICAL or COAXIAL (VIDEO 1 IN, SAT
IN, DVD IN) signals to another input when
they are not currently being used.
For example, to output the sound source for
DVD player using the OPTICAL IN jack on
the receiver, then:
• Connect the optical output jack of the DVD
player to the OPTICAL VIDEO 1 IN jack of
the receiver.
• Assign “VD1 OPT” to “DVD” in the
D. ASSIGN setting.
1 Press AMP MENU.
2 Press V/v repeatedly to select
“AUDIO”.
3 Press or b to enter the
menu.
4 Press V/v repeatedly to select
“D. ASSIGN”.
5 Press or b to enter the
parameter.
6 Press V/v repeatedly to select a
vacant digital audio input (for
example, “VD1 OPT”).
7 Press or b to enter your
selection.
continued