HOMI features
• A digital audio signal transmitted
by
HDMI
can be output from the speakers connected to
this receiver. This signal supports Dolby
Digital, DTS, and Linear PCM.
• The receiver supports xvYCC transmission.
• This receiver supports the Control for HDMI
function. For details, see ""BRAVIA" Sync
Features" (page 75).
Notes on HOMI connections
• An audio signal input to the HDMI IN jack
is
output from the speaker output jack and
HDMI OUT jack. It
is
not output from any
other audio jacks.
• Video signals input to the HDMI IN jackcan
only be output from the HDMI OUT jack.
The video input signals cannot be output
from the VIDEO OUT jacks
or
MONITOR
OUT jacks.
• When you want to listen
to
the sound from
the TV speaker, set "AUDIO FOR HDM!" to
"TV+AMP" in the HDMI menu (page 42).
If
you cannot play back multi channel
software, set
to
"AMP". However, the sound
will not output from the TV speaker.
• The multi/stereo area audio signals
of
a
Super Audio CD are not output.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from an
HDMIjack
may be suppressed by the connected
component. Check the setup
of
the
connected component
if
an image
is
poor or
the sound does not come out
of
a component
connected via the HDMI cable.
• Sound may be interrupted when the
sampling frequency, the number
of
channels
or the audio format
of
the audio output
signals from the playback component
is
switched.
• When the connected component
is
not
compatible with copyright protection
technology (HDCP), the image and/or the
sound from the HDMI OUTjack may be
distorted or may not be output.
In
this case, check the specification
of
the
connected component.
24
US
•
You
can enjoy multi channel Linear PCM
only with an HDMI connection.
• Set the image resolution
of
the playback
component
to
720p,I080i or I080p when
you output 96 kHz multi-channel sound over
an HDMI connection.
•
You
may need to make certain settings on the
image resolution
of
the player before you
can enjoy multi channel Linear PCM. Refer
to
the operating instructions
of
the player.
• Refer to the operating instructions
of
each
component connected for details.
•
We
do not recommend using an HDMI-DVI
conversion cable. When you connect an
HDMI-DVI conversion cable
to
a DVI-D
component, the sound and/or the image may
not be output.
To Next Page
Loading...
