The following illustration shows how to
connect a DVD player or a Blu-ray disc player.
It
is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks
of
your components.
DVD
player
Note
To
input multi
channel
digital audio from the
DVD
player, set the digital audio output setting
on
the
DVD
player. Refer to the operating instructions
supplied with the
DVD
player.
Tip
All the digital audio
jacks
are
compatible
with
32 kHz, 44.1 kHz,
48
kHz,
and
96
kHz
sampling
frequencies.
Blu-ray disc player
-
Video signals Audio signals Video signals Audio signals
oComponent video cord (not supplied)
G)Coaxial digital cord (not supplied)
GVideo
cord (not supplied)
GAudio
cord (not supplied)
25
US
To Next Page
Loading...
