Tip
To
enjoy better surround sound, the distance
between the center speaker and the listening position
[6]
cannot be more than 5 feet closer than the one
between the listening position and the front speaker
[AJ.
Place the speakers so that the difference in the
length
of
[6]
in the following diagram
is
no more
than 5 feet closer than the length
of
[AJ.
Example: Adjust the distance
[6]
to
IS
feet or more
when the distance
[AJ
is
20 feet.
Also, the distance between the surround speakers/
surround back speakers and the listening position
[g
cannot be more than
IS
feet closer than the
distance between the listening position and the front
speakers
[AJ.
Place the speakers so that the
difference
in
the length
of
[g
in the following
diagram is no more than
IS
feet closer than the
length
of
[AJ.
Example: Adjust the distance
[g
to 5 feet
or
more
when the distance
[AJ
is
20 feet.
This is important because incorrect speaker
placement
is
not conductive to the enjoyment
of
surround sound. Please note that placing the
speakers closer than the required will cause a delay
in
the output
of
the sound from that speaker. In other
words, the speaker will sound like it
is
farther away.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!
54
US
• SUR POS.
(Surround speaker position)
Lets you specify the location
of
your surround
speakers for proper implementation
of
the
surround effects
in
the CINEMA STUDIO EX
modes (page 57). This setup item
is
not
available when the surround speakers are set to
"NO" (page 43).
JL~
I··
..
[i:J
"'Ii:~
I
~.'20'
Q Q
• BEHD/HI
Select if the location
of
your surround
speakers corresponds to sections
Q and
e.
• BEHD/LO
Select
if
the location
of
your surround
speakers corresponds to sections
Q and
e.
• SIDE/HI
Select if the location
of
your surround
speakers corresponds to sections
0 and
e.
• SIDE/LO
Select if the location
of
your surround
speakers corresponds to sections
0 and
e.
To Next Page
Loading...
