Listeninglwatching
a
conllected
component
tli~ougb'
DMPORT,
'
conne'ction'"
'"
, <
~
~
;~~J?.i'.::~~
1 Press DMPORT.
You can also use the INPUT SELECTOR
on the receiver to select "DMPORT".
2 Start playback of the connected
component.
The sound
is
played back on the receiver
and the image appears on the TV.
For details, refer
to
the operating
instructions supplied with the DIGITAL
MEDIA PORT adapter.
Notes
• Depending on the type
of
DIGITAL MEDIA
PORT adapter, you can operate the connected
component
by
using the remote. For details on the
remote button operation, see page
13.
• Be sure you have connected the MONITOR
OUT
of
the receiver to the TV (page 91).
Tip
When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press MUSIC repeatedly to select
"PORTABLE" (page 58).
Changing
the
display
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically
as
follows.
All inputs except the FM and AM
band and SIRIUS Satellite Radio
Index name
of
the input*
~
Selected input
~
Sound field currently applied
FM and AM band
Preset station name*
~
Frequency
~
Sound
field currently applied
SIRIUS Satellite Radio
Channel name
~
Channel number
~
Category name
~
Artist name/Feature
~
Song/program title
~
Composer name
~
Signal strength
~
Sound field type
* Index name appears only when you have assigned
one to the input or preset station (page 37, 65).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
Note
Character
or
marks may not be displayed for some
languages.
To Next Page
Loading...
