Sony STR-DH810 - Stabilizing S-AIR Reception

67
GB
S-AIR Operations
Stabilizing S-AIR
reception
Check the following when S-AIR reception is
poor or unstable.
– Confirm the wireless adapters are inserted
correctly (page 32).
– Confirm that the S-AIR IDs of the S-AIR
main unit and sub unit are the same (page
62).
Check the following.
• Keep cords that are connected to the S-AIR
product (AC power cord (mains lead),
speaker cords, or other cords) away from the
wireless adapter and slot.
• Keep as much space as possible around
S-AIR products.
– Avoid placing S-AIR products on top of or
directly below other electronic equipment.
– Avoid placing S-AIR products in a closed
rack, metal rack or under a table.
• Adjust the location (height, orientation, and
place in the room) of S-AIR products until
reception is the most stable.
– Place so that the wireless adapters of the
S-AIR main unit and sub unit are closer.
– Place so that S-AIR products are separated
from other wireless devices.
– Place so that S-AIR products are separated
from metal doors or tables.
If you still cannot improve S-AIR reception,
change the “RF CHANGE” setting (page 66).
When S-AIR reception is poor
I
N
OPTICAL
TV
AM
I
N
O
PTICAL
TV
AM
I
N
OPTICAL
TV
AM
?/1
?/1