Sony TC-K511S - Memory Play Functionality

Locating a Desired
Playback Position
— Memory Play
The Memory Play function allows you to
use the counter to record a desired position
on a Cassette for fast relocation and
automatic playback later.
How to Memorize and Locate
a Desired Playback Position
1 Press MEMORY to activate the
Memory Play function.
2 Press RESET to reset the counter at
the desired position.
The desired position is memorized.
MEMORY
3
While
pressing
B
,
press
<44
to
return
to
the
desired
position
.
Returning to the memorized
position in stop mode
— Memory Stop
If you press only the <4 button when the
MEMORY indicator is on in the stop mode,
the tape rewinds and the unit stops when
RESET MEMORY the counter reaches 0.00.
O O Be sure to first stop playback before
pee activating the Memory Stop function,
U. u
otherwise the AMS function will activate.
To deactivate the Memory Play
function
Press the MEMORY button, turning off the
MEMORY indicator.
r
RE ee ae
3 Note on Memory Play/Stop
In actuality, the tape is rewound to slightly
short of 0.00.
Do not turn off the power while
using the counter
Turning the power off, then on again resets
the counter to 0.00.
The Accuracy of the Linear
Counter
Since the counter is not a digital clock, the
number will differ from the actual elapsed
playback or recording time by a few
minutes, depending on such factors as tape
length and hub size.