Sony TC-K511S - Hooking Up the System

LINE IN
REC OUT
White
Red
LINE OUT
TAPE INPUT
I for playback
RCE
SED
a.
TC-K511S/K411
to an AC outlet
Amplifier
=~ to a wall outlet
Hooking Up the
System
Before You Begin
- Turn off the power to all equipment to be
connected before making any connection.
- Note that the red plug of the supplied
connecting cord is for right-channel (R)
connection and the white plug for left-
channel (L) connection.
See Fig. EY.
e The connecting cords should be fully
inserted into the jacks. A loose connection
may cause hum pickup.
Hook-up Example
Fig. E shows how to connect the unit to an
amplifier.
The arrow <*— shows the direction of
the signal flow.